Products/Services

Manufacturers of quality:                                                                Get a quote

 

Fire Dampers		Smoke Dampers
Volume Control Dampers		Access Panels/Doors

 

 

---

Fire Dampers

Curtain Fire Damper

2 & 4 Hours Fire Integrity Rating
For masonry and dry wall application

General
The Blendair CURTAIN Fire Damper Series BSHD is a simple and effective damper, designed to impede the spread of fire and/or combustible products (eg. smoke) through masonry, lightweight partition or shaft wall openings to other fire compartments of an air-handling system.

This range of Fire Dampers find it’s application in commercial building construction where ventilation, heating, cooling or air-conditioning systems are employed.
The design principle is based on an integral, interlocking stack of blades that closes by gravity to form a tightly sealed barrier when a fusible thermal link breaks at a set temperature.

Blendair CURTAIN Fire Dampers are certified by Standards Australia and meet AS 1682 and AS 1530 requirements.

Features

• Simplicity in design
• Tight manufacturing tolerances
• High strength and repeatable quality of roll-formed blades
• Integral interlocking blade linkages
• Blade stack re-settable from both sides of damper
• Suitable for masonry and dry wall application
• Adjustable mounting angles
• Suitable for multi-module installation
   

 

Horizontally Mounted Curtain Fire Damper

4 Hours Fire Integrity Rating
For Vertical airflow application

General
The Blendair Horizontally Mounted Curtain Fire Damper Series HSHD is a simple and effective damper, designed to impede the spread of fire and/or combustible products (eg. smoke) through a slab or vertical opening to other fire compartments of an air-handling system.

This Fire Damper finds it’s application in commercial building construction where ventilation, heating, cooling or air-conditioning systems are employed.

The design principle is based on an integral, interlocking stack of blades that closes by the release of a spring coil when a fusible thermal link breaks at a set temperature.

At the close position the unfolded blades form a tightly sealed barrier .
Blendair Horizontally Mounted Curtain Fire Dampers are certified by Standards Australia and meet AS 1682 and AS 1530 requirements.

Features

• Simplicity in design
• Tight manufacturing tolerances
• High strength and repeatable quality of roll-formed blades
• Integral interlocking blade linkages
• Blade stack re-settable from both sides of damper
• Suitable Vertical airflow application
• Adjustable mounting angles
• Suitable for multi-module installation
   

 

Motorised Fire Dampers

4 Hours Fire Integrity Rating
Heavy Duty - for wall mounting application

General
The Blendair Motorised Fire Damper Series MFD is a HEAVY DUTY damper, designed to provide efficient airflow control and to impede the spread of fire and / or combustible products (e.g. smoke) through wall openings to other fire compartments of an air-handling system.

This range of Motorised Fire Dampers finds its application in building construction and mining industry where ventilation, heating, cooling or air-conditioning systems are employed.

The design concept is based on an interlinked set of blades connected with a solid drive shaft using a standard pneumatic actuator or electric-electronic fail-safe spring return actuator with a fusible link incorporated into closing mechanism and spring clip holding the blades in the closed position after closure.

Features

• Rugged construction
• Tight manufacturing tolerances
• High strength and repeatable quality of roll-formed and fully welded frame
• Non-corrosive blade bearings
• Stainless steel version available as option
• Suitable for masonry wall mounted application
• Adjustable mounting angles
• Suitable for multi-module installation

Blendair Motorised Fire Dampers meet & are manufactured to Australian Standards 1682 and 1530 requirements.
 

 

Single Blade Fire Dampers (Piano Hinge)

2 & 4 Hours Fire Integrity Rating
For masonry and dry wall application

General
The Blendair SINGLE BLADE Fire Damper Series SBFP is a simple and effective damper 'light weight' fire damper, designed to impede the spread of fire and/or combustible products (eg. smoke) through masonry, light weight partition and shaft wall openings to other fire compartments of an air-handling system.

This range of Fire Dampers find its application in commercial building construction where ventilation, heating, cooling or air-conditioning systems are employed.

The design principle is based on a piano hinged, single blade that closes by gravity to form a tightly sealed barrier when a fusible thermal link breaks at a set temperature.

Blendair SINGLE-BLADE (PIANO HINGE) Fire Dampers are certified by Standards Australia and meet AS 1682 and AS 1530 requirements.

Features

• Simplicity in design
• Tight manufacturing tolerances
• Sturdy press-formed and fully welded frame construction
• Light weight damper easy to install
• Suitable for masonry and dry wall applications
• Adjustable mounting angles
• Suitable for multi-module installation
• Spring assisted closure

 

Multi-Blade Fire Dampers

2 & 4 Hours Fire Integrity Rating
Heavy Duty - for wall and floor mounting application

General
The Blendair MULTI-BLADE Fire Damper Series BMBF is a HEAVY DUTY damper, designed to impede the spread of fire and/or combustible products (eg. smoke) through wall or floor openings to other fire compartments of an air-handling system.

This range of Fire Dampers finds its application in building construction and mining industry where ventilation, heating, cooling or air-conditioning systems are employed.

The design concept is based on an interlinked set of blades that closes by gravity to form a tightly sealed barrier when a fusible thermal link breaks at a set temperature.

Blendair MULTI-BLADE Fire Dampers are certified by Standards Australia and meet AS 1682 and AS 1530 requirements.

Features

• Rugged construction
• Tight manufacturing tolerances
• High strength and repeatable quality of roll-formed and fully welded frame
• Non-corrosive blade bearings
• Stainless steel version available as option
• Suitable for masonry wall and floor mounting application
• Adjustable mounting angles
• Suitable for multi-module installation
   

 

Round Blade Fire Dampers

4 Hours Fire Integrity Rating
Heavy duty - for wall and floor mounting application

General
The Blendair ROUND Fire Damper Series BRFD is a HEAVY DUTY damper, designed to impede the spread of fire and/or combustible products (eg. smoke) through wall or floor openings to other fire compartments of an air-handling system.

This range of Fire Dampers finds its application in building construction and mining industry where ventilation, heating, cooling or air-conditioning systems are employed requiring circular duct systems.

The design concept is based on a circular blade that pivots on a full-length stainless steel shaft and closes - spring assisted - to form a tightly sealed barrier when a fusible thermal link breaks at a set temperature.

Blendair ROUND Fire Dampers are certified by Standards Australia and meet AS 1682 and AS 1530 requirements.

Features

• Rugged construction
• Tight manufacturing tolerances
• Rolled casing seam-welded over full length
• Non-corrosive blade bearings
• Stainless steel version available as option
• Suitable for masonry wall and floor mounting application
• Adjustable mounting angles
• Spring assisted closure
   

 ^ back to top

 

---

 

Volume Dampers

Volume Control Dampers

High Performance/Aluminium

General
The VDA Series Aluminium Volume Control Dampers provide highly efficient airflow control in air handling systems. The VDA is a standard low leakage damper, available with ultra-low leakage feature (optional) and parallel or opposed blade configuration.

The damper frame, blades and linkages are made of Aluminium with minimum maintenance. Interlocking blades for reduced (LOW) leakage. Specially formed standard components and non-corrosive bearings conform to specifications required for high quality, low leakage, maximum rigidity and low operating torque. This allows the use of smaller or fewer actuators.

Multiple sections are inter-connected with a solid drive shaft and provide, together with individually adjustable internal blade linkages, a positive connection for optimum close-off sealing.

Total damper design and close manufacturing tolerances of Blendair dampers result in LONG DAMPER LIFE, SMOOTH & RELIABLE CONTROL and ENERGY SAVING.

Features

• Aluminium construction
• Linkages out of air stream
• Compatible ot duct flanging systems.
• Easier and faster installation.
• Precision control with less motors.
• Clip-on inflatable balloon seal (optional) allows field retro-fit
• Low leakage results in energy saving

 

Volume Control Dampers

Low/Ultra-Low Leakage

General

The VDL and VDU Series Volume Control Dampers provide highly efficient airflow control in conventional air handling systems. VDL is a standard low leakage damper and the VDU is the ultra-low leakage version damper. Both damper types are available with parallel blade configuration for variable air volume application and opposed blades for air mixing application.

Interlocking blade edges and spring steel side seals provide the basis for reduced (LOW) leakage - the ULTRA LOW leakage version is fitted with re-enforced inflatable balloon seals. Specially formed standard components and non-corrosive bearings conform to specifications required for high quality, low leakage, maximum rigidity and low operating torque. This allows the use of smaller or fewer actuators.

Multiple sections are inter-connected with a solid drive shaft and provide, together with individually adjustable internal blade linkages, a positive connection for optimum close-off sealing.

Total damper design and close manufacturing tolerances of Blendair dampers result in LONG DAMPER LIFE, SMOOTH & RELIABLE CONTROL and ENERGY SAVING.

Features

• Spring stainless steel side seal minimises blade end leakage
• 9-breaks interlocking blades ensure rigidity and tighter close-off seal
• Ground stainless steel blade axles and 'Delrin' or Oilite (optional) bearings reduce friction and torque requirements, thus enabling smaller actuators
• Rigid galvanised steel construction resists corrosion and extends damper life
• Corrosive-resistant internal blade linkage allows easy maintenance and field adjustment
• Clip-on design of seal allows field retro-fit
• Ultra-low leakage results in energy saving

 

Volume Control Dampers

High Performance/Stainless Steel

General

The VDH Series High Performance Volume Control Dampers provide highly efficient airflow control in air handling systems for aggressive atmosphere, with outside air control as its major application. The VDH is a standard low leakage damper, available with ultra-low leakage feature (optional) and parallel or opposed blade configuration.

The damper frame, blades and linkages are made of stainless steel and guarantee long life with minimum maintenance. Interlocking blade edges and spring steel side seals provide the basis for reduced (LOW) leakage. Specially formed standard components and non-corrosive bearings conform to specifications required for high quality, low leakage, maximum rigidity and low operating torque. This allows the use of smaller or fewer actuators.

Multiple sections are inter-connected with a solid drive shaft and provide, together with individually adjustable internal blade linkages, a positive connection for optimum close-off sealing.

Total damper design and close manufacturing tolerances of Blendair dampers result in LONG DAMPER LIFE, SMOOTH & RELIABLE CONTROL and ENERGY SAVING.

Features

• Spring stainless steel side seal minimises blade end leakage
• 9-breaks interlocking blades ensure rigidity and tighter close-off seal
• Ground stainless steel blade axles and 'Delrin' or Oilite (optional) bearings reduce friction and torque requirements, thus smaller actuators
• Rigid stainless steel construction resists corrosion in aggressive atmosphere and extends damper life
• Corrosive-resistant internal blade linkage allows easy maintenance and field adjustment and interchangeable components
• Clip-on seal (optional) allows field retro-fit
• Low leakage results in energy saving

 

Non Return Dampers

NON RETURN DAMPERS

• All blades individually hinged on stainless steel stub shafts
• standard with long life nylon bushes
• Blade tips sealed for quiet operation.

BAROMETRIC DAMPERS

• All blades ganged together for uniform movement
• Dampers are counter balanced to allow adjustment for infinite opening pressures

  ^ back to top

 

 

---

Smoke Control Dampers

Ultra-Low Leakage

General
The SSD Smoke Spill Control Damper is a safety device to control the spread of hot smoke in an emergency situation and to efficiently control the airflow in conventional air handling systems. The SSD is an ultra-low leakage damper, which operates safely up to 200 degree C and meets AS1668 requirements. It will be supplied with parallel blades as standard (opposed blades - optional).

Interlocking blade edges and spring steel side seals provide the basis for reduced leakage. For ultra-low leakage the blades are fitted with high temperature silicon-rubber seals that further reduce the leakage. Specially formed standard components and non-corrosive bearings conform to specifications required for high quality, low leakage, maximum rigidity and low operating torque. This allows the use of smaller or fewer actuators.

Multiple sections are inter-connected with a solid drive shaft and provide - together with individually adjustable internal blade linkages - a positive connection for optimum close-off sealing.

Total damper design and close manufacturing tolerances of Blendair dampers result in LONG DAMPER LIFE, SMOOTH & RELIABLE CONTROL AND ENERGY SAVING.

Features

• Spring stainless steel minimises blade end leakage
• Interlocking blades ensure rigidity and tighter close-off seal
• Ground stainless steel blade axles and Oilite bearings reduce friction and torque requirements, thus smaller actuators
• Rigid galvanised steel construction resists corrosion and extends damper life
• Corrosive-resistant internal blade linkage allows easy maintenance and field adjustment and interchangable components
• High temperature silicone rubber for smoke control operation at 200 degree C on ultra-low leakage dampers
• Low leakage results in energy saving

  ^ back to top

 

---

Access Panels / Doors

ACCESS PANELS

Ergonomic Sizing

The standard duct access panel sizes have been selected after careful study of the needs of site engineering and maintenance personnel. Each door allows a different degree of access, enabling the most appropriate unit to be specified, depending on the type of equipment installed in the ducting, and the likely maintenance needs.

NOTE: These additional camlocks on model 0820 only.

 

MODEL	0800	0810	0820
Nom Size	200x125	300x150	460x250
A	203	298	462
B	127	157	258
C	241	349	502
D	165	197	298
E	30	30	30

 

 

MODEL	0830	0840
Nom Size	530x360	635x430
A	538	640
B	355	433
C	578	679
D	400	476
E	30	30

 

ACCESS DOORS

The Access Door is a robust, insulated door prehung in a heavy frame so that the unit is complete, ready for immediate installation. Each door incorporates two sets of adjustable hinges and handles (as per table) and all external hardware is chrome plated. Standard sizes are as shown and special sizes can be made to order.

 

 

 

 

SPECIAL FEATURES INCLUDE

• Adjustable hinges
• Chrome fittings
• Heavy duty rubber gasket
• Inside "escape" handles
• Painted finish is optional

MECHANICAL FEATURES

Construction - Frame is made from 2.0mm zinc annealed steel - mitred, welded and ground. Door bedding is of 1.2mm zinc annealed steel to form inside and outside skin.
Insulation - 25mm thick, in bat form.
Door Seal - The heavy duty gasket compresses on door closure and provides the air seal.
 

^ back to top